Q:
Are Fenwick’s Liquids Safe To Enter Mains Drains?
A:
Due to the biodegradable nature of the ingredients, the amounts used in normal cleaning are quite acceptable, even where septic tanks and non-mains units are used.
Q:
Will Fenwick’s Products Wash Out Of Clothing If Accidentally Applied?
A:
FS-1 can actually help clean the garment during the normal washing cycle, so a small amount can be added to stubborn stains before washing.
Q:
What Should I Do If I Accidentally Ingest Fenwick’s Products?
A:
Fenwick’s products are not designed to be ingested, but if this does occur by accident, then it is always wise to seek medical attention if any side effects are felt.
Q:
What Should I Do If A Child Accidentally Ingests Fenwick’s Products?
A:
Always seek medical advice and take the packaging along with you as it displays some medical advice, the key ingredients and Fenwick’s contact details. You are responsible for the safety of your child and they deserve the best possible care.
Q:
What Else Can I Use FS-10 On?
A:
FS-10 can be used to clean car alloy wheels, car bodywork, and PVC double-glazing and conservatories, for instance. It even makes a great hand cleaner.
Q:
Application Tips:
A:
FS-1 DEGREASER: Apply directly to the chain, gear mechanisms, sprockets, chainset and pedals and leave to soak. Agitate with a brush to move the debris away from the surface to be degreased. Rinse off with water. No need for a jet wash.
DISC BRAKE CLEANER: Use in a well ventilated area. Spray from 12-18 inches directly onto the rotor and caliper mechanism. Spray a second time to completely remove debris from inside the caliper and from the brake pads. Wipe components as necessary, but use a contaminant-free cloth. Allow to evaporate.
FS-10: Spray liberally all over the bike. Leave to soak. Agitate and then rinse off with water. The optimum mixing ratio is 10 parts water; 1 part FS-1.
To mix your own diluted 1 litre bottle of FS-10 using FS-1 concentrate, pour approx 90ml of FS-1 into a 1 litre bottle and fill to the top with water.
LUBRICANTS (TWIST CAPS): Fenwick’s lubes feature a twist cap. By turning the upper section anti-clockwise, the lube is dispensed at a variable rate, depending upon the degree to which the aperture is turned. When the lube is no longer required, fully twist the upper section clockwise to prevent contaminant infiltration and unnecessary spillage.
LUBRICANT APPLICATION: The best way to lubricate the drivetrain is to lubricate the chain only. Then, rotate the chainset clockwise and allow the chain to run up and down the sprockets using the gear selector mechanism.
Chains lubed with Fenwick’s lubricants are best cleaned with FS-1 degreaser as the 2 products are totally inter-compatible for the best possible results.
Q:
Workshop Range
A:
HAND PROTECTION APPLICATION
For best results, follow the “traffic light” rule:
I. Use Barrier Cream (red/pink cream) before starting work.
II. Use Hand Cleaner (amber/orange) as required and reapply Barrier Cream after every cleansing.
III. After work, use hand cleaner to thoroughly clean hands and then apply Afterwork Cream (green) to remoisturise and protect the skin.